24/7 Help Desk +1-866-990-1185 (US/Canada)

How to Fix Epson Printer Error Code 0x97?

Did your printer just suddenly stop working and only shows Epson Error Code 0X97? Don’t need to be devastated.  Here we will offer you the prominent solutions to fix Epson Printer Error Code 0x97 by yourself. Follow the troubleshooting solutions presented in this guide and you will be able to repair your Epson Printer with Error 0X97.

If you get Error 0X97 on your Epson printer then trust me you are not the only one. Many Epson users are reporting the same and ask for help from the technicians over Epson Printer Technical Support. In this article, we will be mentioning the solutions/remedies to fix Epson Error Code 0x97 recommended by the professional engineers.

What is Epson Error Code 0x97? And Why Do I Get It?

This error code majorly happens when there is a problem with your Epson printer’s internal hardware. Apparently this common error occurs on models:  wf-3620, wf-4630, wf-3640 and 7610. Talking about why it would happen, then there must be the following reasons:

·       Damaged/corrupted internal hardware in Epson printers

·       Several antivirus updates in your pc/laptop also bans printers to work

·       Corrupted motherboard issue

Epson Error Code 0X97: How to Fix This Error?

We recommend you to quickly fix this error by trying these useful solutions, as under:

Solution 1: Reboot Your Device

Sometimes a simple reboot can rectify all the common printer issues easily. Here’s how you can reboot your device.

  • Turn off your printer power button and unplug it.
  • Disconnect all cables and USB and wait for 5 minutes.
  • It’s time to hold the power button for 1 minute.
  • Don’t release the power button and plug the power cable back in to the power board and hold the button for another 1 minute.
  • Now, release power button and check your printer to see if you still get the error message.

Solution 2: Clean the Clogged Nozzles

  • Unplug all the power cables of your Epson printer.
  • Now, open the case of the printer and use an ammonia-based cleansing liquid or cleanser and wet a piece of soft cloth in the solution and start cleaning.
  • Put the solution-based cloth below the print head and adjust and move the printer head to the center.
  • Leave the cloth for up to 12 Hours.
  • After 12 hours, remove the cloth and close the printer.
  • Connect your printer and turn the power button ON and check if the error is still persist.

Solution 3: Unplug and Plugin-Back the Epson Printer

  • To start with, open the case of your printing device and see if any paper jammed inside the printer.
  • Remove all the available cartridges from your printer carefully and unplug all the USB cables connected with Epson Printer.
  • Press the power button to turn off the printer and wait for a few minutes and plug in back.
  • Now, connect all the USB cables that were removed to the printer earlier.
  • Switch ON the printer and verify if the error 0X97 is fixed or not.

Solution 4: Remove and Reinstall Your Ink Cartridges

In major cases, the error code 0x97 occurs when any of your ink cartridges is defective or disconnected. Try removing your ink cartridges to check if any of them is defective and if it does then quickly replace it.

In case, all your Epson printer cartridges are in good condition, then there must be a poor connection between your cartridges and your printer that causes this issue. To fix it, reinstall your cartridges and make sure your cartridges are working properly.

Solution 5: Make a Use of Windows Printer Troubleshooter

Another ideal way to fix Epson printer error code 0x97 is to run the Windows printer troubleshooter. Here’s how you can do that:

For Windows 7 or 8:

  • On your keyword, press Windows logo key and type Troubleshooting.
  • Now, select
  • In the next step, click Use a printer option and then tap Next.
  • Wait for a couple of minutes and check the problem.

For Windows 10:

  • Press the Window logo key and type
  • Now, select Troubleshooting settings and click
  • Then click Run the troubleshooter to complete the steps.

Hopefully, by using these steps your printer works properly now! If all fixes are tried without showing an improvement, then you’ll need to bring your printer to a repair store for some professional help or call for official help.

About the author

admin administrator

Leave a Reply