24/7 Help Desk +1-866-990-1185 (US/Canada)

How To Fix Canon Printer Error B200?

Fix-Canon-Printer-B200-Error

Canon Printers are popular worldwide for its accessibility and easy troubleshooting. One of the main support code Error B200 is one such common issue encounter in the Canon Printers very frequently. This makes it even worst when you need to print something important and suddenly an error code B200 pops up in your printing machine. To get things more sorted, here we present some troubleshooting tips to fix Canon Printer Error B200 more easily. So without further ado, let’s jump into the tips.

What Causes Canon B200 Error?

At its most basic level, the B200 error majorly happens due to problematic cartridges and issue with your print head. A faulty print head is the part of your Canon printer, which distributes the ink from the cartridges onto the paper. Print heads are disreputably problematic, especially on cheaper printer’s brand, so a Canon Printer B200 error means there’s some problem with the print head reading by the printing device.

How Can I Fix Canon Printer Error B200?

There are several different ways you can try to fix Canon Error B200 (a faulty print head issue). Try these below advised fixes before you go replacing your entire device.

  1. Reset your printer: One way to fix the B200 error on your device is to reset it. For this, unplug your printer and leave it to disconnect for at least 30 minutes or more. Sometimes a good reset will allow the printer to cool down and reset everything. Once 30 minutes are over, turn your printer on and check if the problem is resolved.
  2. Check and Clean any Obstructions: Sometimes there’s a possibility that something is disrupting the connection to your printer head. In this manner, it is important to check and fix if any obstructions cause. To fix this issue, turn off your printer and open the door of your printer and the print head should move so you have access to it. Carefully remove all the papers and check for any issue.
  3. Clean your Printer’s Print Head: Majorly the error B200 occurs, due to the problems with your print head. You can try to remove your Canon print head and then clean it. We strongly suggest, using a printer manual for the process. Once it is done, make sure it is completely dry before you put it back in your printer.
  4. Reboot is a good option: Some of the users also suggesting to press the power button rapidly for a long time. This will start the reboot mode on the printing device and you might want to try that to fix the fault.
  5. It’s time to manually clean the print head: You can use either pure alcohol or a non-oil-based cleaner to clean up the gold contacts on the print head. Try using a microfiber cloth to rub the cleaner onto the contacts, and then let it dry completely before reconnecting.
  6. Turn off the Canon printer and open its print cover: Open the print cover and turn the printer on. The cartridges will start moving to the left side. Now, before the cartridges reach the left side, close down the printer cover and leave the printer on.

Note: Make sure to close the print cover after the cartridges pass halfway to the left side.

  1. Remove old ink: There might be hardened ink trapped inside the print head. So, it is important to remove all the old ink and clean it under hot tap water until the water comes out clean. Use a paper towel and make sure to dry it, then reinsert the head into the printer.
  2. Re-install your printer drivers: Explore the official Canon support page and sear for your printer model. Now, follow the directions for updating your drivers.
  3. Replace the problematic cartridge: Majorly the Canon printers have come with 4 cartridges and you can replace the older one with the new one. Faulty cartridges rarely trigger this error code, but you never know if this causing the error or not. You can use a detailed user manual of the printer to know how to change the cartridge.

If none of the above-guided methods work, then it’s time to go shopping for a new printer.

About the author

admin administrator

Leave a Reply