Printer

How to Set Up Wireless Printing on a Dell

Set-Up-Wireless-Printing-on-a-Dell-printer

Printing through a wired printer is an old story; now you can take print from your Dell printer directly, without getting physically connected. You don’t need a cable and USB cord connected with your computer or device and with your printer. You don’t even need to use any cable; you can use the wireless network and get the print.

This is easy with Dell Wireless or online printing feature; now you can get print using your Dell printer and the wireless network. Simply, configure your Dell printer with the working and defined wireless network and get the print easily.

Steps to set up wireless printing on a Dell Printer

  • Start with installing the software provided with your Dell printer on any computer on your network

This software helps connect your printer to the network manually, if needed then you installs required drivers of the respective Dell printer from http://www.dell.com/support/article/in/en/indhs1/sln287150/getting-dell-printer-drivers–software–user-guides-and-firmware?lang=en

  • Now, you need to on your Dell printer and connect it to your local network. If the printer uses a wired or Ethernet connection, then you need to connect the Ethernet cable to an available port on your wired router

If you use your computer as the router, then connect the Ethernet cable to given port on your computer. If you want to use on the Wi-Fi connection then do not connect the Dell printer to your computer until the software prompts you to do so. You can use a provided USB cable to connect it if needed

  • After that, simply let the Dell printer’s software to finish installing your Dell printer on computer
  • As the installation will be completed then go to Start on any computer on your network connected
  • And, select the Devices and Printers option here
  • Also, click on Add a Printer button
  • Here, you need to select Add a network, wireless or Bluetooth printer from the given option
  • Here, choose your Dell printer carefully from the list of available printers by clicking on it
  • After that, press the Next button

This is final step for installation; here select Install Driver if prompted, which you can easily download from Dell official link http://www.dell.com/support/article/in/en/indhs1/sln287150/getting-dell-printer-drivers–software–user-guides-and-firmware?lang=en

  • Here, you can define that you want to set the printer as your default or not and press Finish button
  • That’s all, you have successfully set up the Dell printer on your network

How to set up Printer on Windows 10

set-up-Printer-on-Windows-10

Windows 10 is the latest operating system of Microsoft Corporation. All latest computers and laptops based on Microsoft OS are powered with Windows 10 OS. This OS has its new and many exciting features for users.

Users who are not very much familiar with Windows 10 OS, they are struggling to install their existing printer on it. We bring a solution for you to set up your printer easily on your Windows 10 based computer system in just 10 minutes.

Usually printers come with PnP (Plug and Play) functionality but sometimes it doesn’t work and then we need to install it manually.

5 Tips for troubleshooting your Printer

Set up Printer on Windows 10

  • First you need to sign-in or log on to your Windows 10 based computer with an administrator account
  • Then connect your printing device to the PC
  • Now Click the START button from the desktop screen
  • From the Start menu, click Settings

Set Up Printer On Windows 10

  • Now click on the SETTINGS window, click Devices

Printer Set Up

  • As the DEVICES window opens up then from the left pane you need to make sure that the Printers & Scanners category is selected
  • Here from the right pane, under the Add printers & scanners section, you need to click on Add a printer or scanner
  • Now wait while Windows searches for the connected printer

NoteIf Windows finds the printer then you can Click its name and further follow the on-screen instructions to complete the installation process. But if your OS fails to detect the printer then you can move to step 9

Add Printer and Scanner

  • But if Windows cannot detect your connected printer then click on The printer that I want isn’t listed link

Printer Support Services

  • Here on the Find a printer with other options window, click to select the Add a local printer or network printer with manual settings radio button option
  • And click Next to continue
Windows Customer Service +1-888-335-2111

Connect Printer Set Up

  • Now on the Choose a printer port window, leave the default options selected and click Next

NoteIf you are an advanced user, you can also choose a different option from the Use an existing port drop-down list or you can choose your own port manually. Simply select option of Create a new port and here specify port in the given field before you click on Next button

Set Up Printer Help

  • Then on the Install the printer driver window, from the displayed list of printer manufacturers in the left pane, simply click to select the one to which the connected printer belongs
  • Here from the right section, locate and click to select the specific model of the printer that is connected to the PC

NoteIf you have already downloaded driver for printer manually from its official website then you can also click the Have Disk button and browse for the driver of connected printer

  • Now click Next to proceed to the next step

Printer Support

  • On the Type a printer name window, in the Printer name field, type an informative name for the printer and click Next

Printer Set up services

  • On the Printer Sharing window, make sure that the Share this printer so that others on the network can find and use it radio button is selected

NoteBut if you do not want other network users to use this printer then you can select the Do not share this printer radio button and jump to step 20

  • Here in the Share name field, type a short share name for the printer

Note – This name will be displayed to the remote users when they search for this printer over the network which you specified here. Optionally you can populate the Location and Comment fields with your preferred information

  • Then click Next to continue

Printer Customer Support

  • On the final page of the wizard, and now optionally you can check the proper functioning and connectivity of the printer by clicking on Print a test page button.
  • Finally click Finish to complete the process.

Still Need Help? You may contact at Epson printer support number for Set up, Troubleshooting etc.

 

Epson WF 2630 Install & Setup

 

How to Setup EPSON-WF-2630 printer

The Epson WF 2630 is an all-in-one inkjet printer accepted and appreciated widely for both home and official purposes. Thanks to its compact design, Epson WF 2630 is easy to carry and easy to set up. It lets you print at the convenience of your hand via tablet and smartphone. With Epson WF 2630, you can do more with less. The printer features low-cost ink cartridges that make printing efficient and productive.

This multipurpose printer supports multiple sizes of paper including glossy paper, presentation paper matte, double-sided presentation paper matter, A4, A5, A6, B5 paper sizes and envelopes too. Capable of handling up to 100 pages and an all-size paper range, this Epson WF 2630 is a perfect choice for your day to day printing use.

So, order a piece for yourself today and make the most of this printer for printing, scanning, copying and faxing.

Amazing Features in Epson WorkForce WF 2630

  • Robust and sleek design
  • Build with Micro Piezo technology
  • High-Performance renderer
  • Agile and user-friendly
  • Wireless and cloud printing
  • High-resolution printing and scanning
  • Quality images and crisp text
  • Epson mobile solution
  • Direct scanning to Facebook

What your Get in the Epson WF 2630 Box?  

1.) Epson Workforce WF 2630

2.) Power Cord

3.) Installation CD

4.) Instruction Manual

5.) DURABrite Ultra Ink cartridges – 220-series ink cartridges (Four) – Cyan, Magenta, Yellow, Black

Epson Help Desk +1-888-335-2111

Getting Started with Epson WF 2630

1.) Plug in your Epson Printer to power and Switch it ON by pressing the power button on the printer. And, make sure that you have not connected your printer to the computer.

2.) Now, configure your printer as per the on-screen instruction displayed on your printer. You will need to set up your printer for Language, Country, Date and Time. You may need to wait till your printer configures everything modified by you.

3.) After the configuration process gets completed, you will be prompted with a message on the printer’s display to install the ink cartridges. To install cartridges, first, remove the yellow strip from the cartridges.

4.) Now, simply lift the top of the printer and insert each ink cartridge in their dedicated slot. Put the cover back and wait until printer loads the cartridges.

5.) Next, when prompted to select the paper size and type, first select the size of the paper and then the type of paper. After that, pull the tray from the bottom of the printer and put the paper in the tray properly. Put the tray back into the printer. Your printer is now ready to be connected to a computer.

6.) Coming to the computer now, ensure that you have not connected your printer to the computer yet. Now, load the driver software CD that you got with your printer and follow the on-screen instruction given in the CD to install the driver software into the system.

7.) Once your reach the page where Select Your Connection message appears, select any option from the given ones on the screen

  • Wireless connection,
  • Direct USB connection
  • Wired network connection

Select any of the one options and follow the on-screen instructions to set up an internet network connection. Once connected, you can then start using your printer for scanning, printing, copying and faxing.

Note: In case you don’t have installation CD, you can visit the epson.com/Support/Printers/All-In-Ones/WorkForce-Series/Epson-WorkForce-WF-2630/s/SPT_C11CE36201 to download and install the latest driver software for your Epson WF 2630 Printer.

Set up and Register Your Epson WorkForce WF 2630 Printer in Epson Connect

1.) Turn ON your Printer and install the Epson Connect printer setup using the installation disk that you get with your printer.

2.) Once installation completes, launch the program. The application will automatically start searching for your printer. As it gets displayed on the screen, select your printer and proceed to the next screen.

3.) Click on the Printer Registration and then on then confirm the License Agreement after reading them carefully.

4.) On the next screen, you will be prompted to furnish some information. When completed click on the Finish button to complete the Epson Connect registration process.

Troubleshooting Steps for Common Problems in Epson WF 2630

Red Light Blinking Problem

The new range of Epson Printers is integrated with a low-level ink warning system. Whenever the system identifies that the ink level is going down or critical, a red light starts blinking on the printer. The warning system calculates the level of ink by counting the number of paper printed. The warning system is programmed to function according to an ink cartridge capable of printing 4000 printers. So, whenever the print count reaches to 3800 or above, the warning system starts assuming that the ink level is low and start giving warning by blinking red light frequently.

To fix this issue, simply remove the ink cartridges from the printer and install it back when the right blinks. The problem will be fixed.

Cartridge Recognition Error

The advanced Epson printer like WF 2630 is loaded with specific IC chips that do not recognize third-party ink cartridges and prevent them from functioning. In case you use such ink cartridges, you can fix this issue by simply restarting your printer once. Just turn off once and turn it on back to fix the problem.

However, if your printer still doesn’t recognize the cartridges, it is suggested to use genuine ink cartridges recommended by Epson to get rid of the issue.

  • 3/5
  • 2 ratings
2 ratingsX
Very bad! Bad Good Very Good Excellent
50% 0% 0% 0% 50%

Related Articles

Setup Epson Expression ET 2550 Setup & Installation

Epson L220 Printer Setup & Installation

 

Epson L220 Printer Set up

Know About Epson L220 Printer

Epson L220 is a perfect printer for both home and office needs. Coming from the house of Epson, quality and perfection are bound to be noticed in this new beautiful model. Integrated with Epson’s core Micro Piezo technology, the L220 is tough to beat when it comes to quality. It features a built-in ink tank, loaded with genuine ink to generate color-rich prints while making no compromise in speed. Talking about its scanning part, the L220 is combined with Contact Image Sensor (CIS) to let users perform high-quality scanning with the rich color output.

To keep things convenient, Epson has designed the L220 model in such a way that a user can easily set up and use it. The printer is cost-efficient as it has the capability of printing around 6500 colored and 400 black & white papers with just one ink cartridge respectively.

The printer is compatible with Presentation Paper Matte (including Double Sided), Glossy paper, A4, A5, A6, B5 paper sizes and envelopes as well. With a normal print speed of 9 paper per minute and capacity of handling 100 pages with all sizes, there is no denying that Epson L220 is perfect for both home and office use.

Advantages of Epson L220

  • Great performance with an appealing design.
  • Supports cloud and wireless printing.
  • Color rich images with crisp text.
  • Quick and easy to use.
  • Epson mobile solution.
  • Can Print, Scan, and Copy

How to Setup Epson L220 for First Use?

1.) Connect your Printer to power and turn it on by hitting the power button on the printer.

2.) Now, you may need to configure your printer, for Date, Time, Language and Country. Wait till the printer configures the input made by you.

3.) Once the configuration is done, you will then need to install the ink cartridges. Open the top of the printer to install ink cartridges in their slot. Close the top when done. And, make sure to remove the yellow strip from the cartridges. Wait until printer reads the cartridges.

4.) Next, you will need to select paper type and paper size. First, select paper size and paper type. After that, remove the tray from the bottom of the printer carefully and load paper. Insert the tray back to its position.

5.) Your printer is ready for copy, scan, and print.

6.) Now, you will need to set up your computer to start using the printer. But, make sure that you haven’t connected your printer to you computer yet.

7.) Insert the product CD that comes with your Epson printer and simply follow the on-screen instructions to install the setup program.

8.) When the Select Your Connection appears on the screen, select Wireless connection or Direct USB connection or Wired network connection option. Follow the on-screen instruction after selecting one option. Once done can now easily use your printer to print, copy or scan via your connected computer.

Note: If you don’t have installation CD, you can download the driver software for your Epson L220 from the official website.

Epson Customer Service +1-888-335-2111

Ways to Use Epson L220 Printer

  • Wired printing
  • Remote printing
  • USB wired printing
  • Wireless Printing
  • Using Smart Phone Printing

How to Setup and Register Epson L220 Printer in Epson Connect?

  1. Switch ON your Epson Printer.
  2. Now, install the Epson Connect printer setup from the installation disk and launch the program when installation is done.
  3. Your printer will be automatically searched by the application and it will appear on the screen. Simply select your printer and Click Continue/Next.
  4. After you have selected your printer, click on Printer Registration.
  5. Next, click Continue/Next to get to License Agreement
  6. Agree to the Agreement after reading it and click Next to get the print.
  7. Fill up your required details on the page and select the Finish button to complete the registration of your printer to Epson Connect.

Common Issues with Epson L220

What Does Red Light Blinking Mean in Epson L220?

Epson L220 printer comes with an integrated low-level ink warning system. The blinking of red light in your Epson L220 is just an indication of low-level of ink.  The system calculates the level of ink by the number of pages printer. It has been programmed to work according to an ink tank capable of 4000 prints.

When the print count reaches to 3800 or up, the printer’s program assumes that the ink level is getting down and this it starts blinking the red light and ultimately stops functioning. A user can easily overcome the error by detaching the ink tank from the printer while the red light blinks.

How to Solve Epson Cartridges Recognition Errors

Epson Printers are integrated with special IC chips that prevent the use of third-party cartridges or ink tanks by not identifying them. If you use such ink tanks or cartridges, your printer will display such error and stop functioning.

In order to solve the error, you just need to restart your printer and the error message will not display. However, if the error still persists, it is best to replace the non-authentic parts with the authentic ones that are recommended by Epson.

 

How to Fix Epson Printer Error Message 0x00000643?

 

How-to-Fix-Epson-Printer-Error-Message

The printer installation failed.

Operation could not be completed (error 0x00000643)!

This message haunts all the Epson Printer users who want to use it on their computer system, yet unable to do that due to this error. Technically, this is not an issue with your Epson Printer; there is something wrong with your computer’s operating system or driver.

When you get a new Epson printer or want to install it on some new computer system; you might get the error and message of failed installation. There could be any of these reasons which lead to this error message on your computer screen.

  • No compatible driver installed for your Epson Printer
  • Firewall or other security program is blocking the installation process
  • Registry file has invalid entries
  • Virus and other harmful malware attack
  • Outdated system driver setup files being executed

This is a common issue when the driver is not compatible or matches with your computer configuration. This will result in failed installation; as most of the latest operating system comes with pre-installed drivers.

Sometimes the security software, Firewall or local security software blocks the installation considering as a security threat. You can fix it by simply disabling or uninstalling such software.

When you are not sure; you should go for a virus scan of your computer system; these viruses are the common cause for stopping the installation process. In fact, if your computer system is virus infected, then you need to clear it first and then go for printer installation.

We have an alternative method to get a quick fix for error 0x00000643. You just need to follow these steps and get the issue fixed.

  • Again start the Printer in Safe mode with networking option
  • Now, delete all the files and folder out of location which are
  • Spool\printers
  • Spool\Drivers\w32x86
  • After that open the registry by following Start > Run > Type regedit > OK
  • Here, you need to locate the registry key and keep only the sub-keys such as drivers, print processor
  • Also expand the version X sub keys and then you need to delete all printer driver entries
  • And keep the following sub keys such as BJ language Monitor, Local port, PJL Language Monitor, Standard TCP/IP protocol, USB monitor
  • You need to check the Print spooler service is it running or not
  • Also, make sure that Print spooler service settings are on Automatic Mode. Once the mode starts the print spooler service restart the computer again
  • Now, you can make attempt to install the printer with latest driver

These are the best alternatives a user can try with this error; if there is no improvement, then you should call the expert.

How to fix the faint or dotted print issues with Epson printer

 

fix-the-faint-or-dotted-print-issues-with-Epson-printer-1

If you are getting the dotted printer or faint print outs from your Epson printer, then you need to give it a Print Head Cleaning routine. The poor print quality from your Epson printer has so many reasons, yet faint and dotted print needs a Print Head cleaning.

Here, we have step by step guide for Epson printer users to get the Print Head clean. There are two different methods to do it. The first guide is for Windows users and another is for Mac computer.

Windows user’s guide for cleaning the Print Head of Epson printer

  • Start from your Epson printer
  • You need to make sure that your Epson printer is turned ON and the ink out light is OFF mode
  • Then, go to your computer system and access the printer software or Epson utility software
  • Here, you need to click on the Utility tab and then click on the Head Cleaning button
  • After that, follow the on-screen instructions further to proceed
  • You can see that the power light and the ink lights flash during the cleaning cycle of your Epson printer
  • The moment power light stops flashing, just click on Print Nozzle Check Pattern in the Head Cleaning dialog box to confirm that the head is clean and to reset the cleaning cycle for further user
  • We always recommend printing a few pages at least once every month to avoid any such situation of poor print quality or dotted print

Mac users can learn to clear the Print Head by following these steps.

Mac user’s guide for cleaning the Print Head of Epson printer

  • First, go to your Epson printer and here make sure that the printer is ON and the ink out light is OFF to proceed further
  • After that move to your computer and get access of the Print or Page Setup dialog box and click on the Utility icon button
  • And then, click the Head Cleaning button for cleaning it
  • You will be guided by the on-screen instructions; just follow them
  • Here, the power light and the ink lights flash while the printer performs the cleaning cycle; you can review it meanwhile
  • As the power light stops flashing, then click on the Confirmation button on the Head Cleaning dialog box to print a nozzle check pattern and to reset the cleaning cycle for your printer
  • You can use the check pattern to get assure that the head is clean
  • Make sure that you are getting few pages in print in each month

After getting Print Head cleaning routine done, you need to go for a test print. Just go for a test print and assure about the quality of print.

How to Setup and Register Epson Pro WF 4640 Printer

Setup-and-Register-Epson-Pro-WF-4640-Printer

 

Experience the efficiency and efficacy of a professional-grade Epson WorkForce Pro WF-4640 all-in-one printer. This modern Epson Workforce Pro WF-4640 produces laser-sharp, high-quality prints at an amazing speed and features a 2 x 250-sheet paper trays offering remarkable paper capacity for heavy duty.

Powered by Epson’s PrecisionCore printing technology, this all-in-one printer renders Performance Beyond Laser. PrecisionCore is the next generation of inkjet printing technology which delivers fast printing with the superior quality result. Talking about its efficiency, the printer boasts a duty cycle of 30000 pages, consumes less power as it uses 70% less power compared to laser printers and saves 50% on paper with its automatic, two-sided printing and copying feature. No matter whether you are looking for a Wireless or Wired networking, setting them both is quite simple and easy.

Moreover, the Epson Pro WF 4640 offers utmost convenience to its user by offering the option of printing at any time from anywhere in the world with Epson Connect. The Epson Connect includes Epson Connect Email Print, which allows a user to print the email and file attachments by sending them to an email enabled Epson Printer. It also comprises Epson iPrint app which allows users to access, print and save photos and documents using their iOS and Android devices. Apart from this, a user also gets to use their printer with AirPrint and Google Cloud Print. When there is everything available in this Pro WF 4640 Epson Printer, why would anyone look anywhere?

Features of Epson Pro WF 4640

  • Laser sharp text and vibrant graphics
  • Wireless networking
  • Epson Connect
  • Energy and Paper Saver
  • Fast Printing – 20 ISO ppm (Black) and 20 ISO ppm (Color)
  • High-speed Faxing
  • Easy navigation and control with huge 4.3” inch smart touch panel
  • Easily scan to PC and Cloud
  • Automatic 2-sided printing
  • Dual Front Loading Paper Tray + Rear Feeder
  • Designed to be recycled

What Do You Get in the Box?

  • Epson Workforce Pro WF-4640 All-in-One Printer
  • Installation disk
  • Power cord
  • Instruction manual
  • DuraBrite Ultra ink cartridges9 — Four 786 series ink cartridges: Yellow, Magenta, Cyan, and Black
  • Instruction manual

How to Setup and Register Epson Pro WF 4640 in Epson Connect?

Make sure that your product is connected to a wireless or Ethernet network before proceeding with the below-mentioned steps.

1.) Turn ON your Epson WF 4640 Printer and using your installation disk, install the Epson Connect Printer Setup. If you don’t have access to the installation disk, you can download and install the Epson Connect Printer Setup Utility from the Epson’s official website.

2.) Once you have installed it, launch the application and wait until it finishes searching for your printer and displays the result. From the result, select your Epson Pro WF 4640 Printer and click Next/Continue.

3.) After that, select Printer Registration option and click Next/Continue to get to the License Agreement page.

4.) Read the terms of License Agreement carefully and click Agree. After that, click Next to get the print out of it.

5.) Enter all your details in the required field and click Finish to complete the Epson Connect registration process.

Common Issues with Epson Pro WF 4640

Red Light Blinking Error

The Epson Pro WF 4640 Printer comes with an in-built ink level warning mechanism which alerts a user when the printer’s ink level seems to b getting critical. This mechanism depends on the pages printed to determine the level of ink in the cartridges. It is designed to work according to an ink tank or cartridges capable of printing 4000 pages.

When the count level gets closer to 4000, the printer’s mechanism considers that level of ink is going down and thus it warns by flashing the red light continuously on the printer and eventually coming to a halt.

As this is just a precautionary warning alert from the printer, this error can be removed by dislodging the ink cartridges from the printer while the red light keeps on blinking.

Connect with Mobile Device

To make it convenient for the users, Epson combines it’s Epson Pro WF 4640 Printers with an option to connect to mobile devices using the Epson iPrint application. The application is available for both Android and iOS platform, making it easy for both platform users to easily Print and Scan documents through their mobile devices. However, it is necessary to make sure that the device is compatible with the printer.

  • Go to the Google Play Store or Apple App Store.
  • Type Epson iPrint in the search bar to find the app.
  • Tap on the app from the result displayed.
  • Download and install the app to your device.
  • Open the application and follow-on screen instructions to connect your printer with your smart device.

Cartridge Recognition Error

Epson adds specially designed IC chips in its Printers’ range in order to prevent the use of third-party ink cartridges. When users install such third-party or non-authentic ink tanks or cartridges, the Printer simply rejects by not recognizing them, giving an error message like ink system or cartridge is not recognized. Epson does this to prolong the life of its printer by only allow the use of authentic, company recommended parts.

However, in order to bypass this cartridges recognition error, you will need to restart your printer once. If this doesn’t clear the error message, it is best to install the Epson recommended, genuine ink cartridges for the printer to get rid of the error message.

Related BlogHow to Connect and Register Epson Pro WF 4630 Printer

How To Fix Epson WF-4630 Wireless Printer Not Printing?

Epson-WF-4630-Wireless-Printer

Along with this, checking the device comprehensively from your end most probably not fix the trouble since you are not a professional expert. And thus there can be many causes for printer not printing.

Simply follow these steps to fix wireless printer not printing issue.

Method 1:

You need to go through the below-mentioned steps and resolve the issue of your Epson WF-4630 wireless printer not printing issues:

  • To begin with, you need to power off the devices linked with printer in the following sequence, Epson WF- 4630 wireless Printer, personal computer, router, wireless access point.
  • With this, after turning off, you need to power on the devices in the following way: router and access point, PC, Epson Printer WF-4630.
  • Simply make sure that your device is completely activated before moving to the next one. Hopefully, this will permit the device to reinitialize and then set up connection.
  • Now, it’s time to recheck the printer if it’s working rightly and has regained begin taking the prints else you need to follow the Method number 2 for fixing the printer complication.

Method 2:

If you are still confronting troubles of printers, then you need to uninstall the printer software and afterwards you can reinstall.

The following directives should be implemented after all devices connected to Epson printer have been restarted in a right manner:

  • First of all, you need to uninstall the Epson software from your computer system screen.
  • Once removing re-installing the software.
  • Then you need to go through the Wi-Fi connection setup at the same time having the apt look over the setup procedure.
  • And your wireless credentials are required to enter the wireless for connecting with the wireless network.
  • The setup process is well-suited and the printer is available to give printing.
  • Last but not the least, you can run for the test print.

Method 1 and 2 are quite helpful for fixing Epson WF-4630 wireless printer not printing issue. The above two techniques are adequate for fixing your Wi-Fi connection trouble of your Epson WF-4630 and gives you the permission to print right away.

How to Fix HP Printer Drivers Windows 10 Issues?

Fix-HP-Printer-Drivers-Windows-10-Issues

It is a great concern for many users that HP Printer is not supported by the Windows 10, especially for those who have upgraded their system from Windows 7, 8 or 8.1 to Windows 10. If you are one of them and want to configure your machine, then it is recommended to check the compatibility of your printer with Windows 10 Settings. Make sure your printer is in working condition before starting the process.

You should check the link Drivers and Software Support for Windows 10 of the official website of HP to find out the compatibility of the Printer with it. You will find different categories of printers like Inkjet, Laser, Deskjet and many more. After checking the compatibility of the printer, you need to install the printer to your computer.

On the other hand, Windows 10 generally eliminates all the software and apps which are not compatible with it. If you will face any issue regarding the driver, then both Windows and HP have significant support system for it. There are different types of drivers available to suit the requirements.

You can also seek the help of HP Print and Scan Doctor to find out any kind of printing and scanning problem. You need to run an automatic troubleshooting for it.

Here is a list of Printer Driver available on the official website of HP and Windows.

  • Full Feature HP Printer Driver Download: From the official HP website, you can download the Full Feature HP Printer which is recommended for many printers. The software provided by the HP printer driver will help you to gain the full functionality of the Printer.
  • Basic HP Driver Download: The Basic HP Driver allows you to carry the basic printing functions. It doesn’t even allow any software to copy and fax any documents.
  • HP Enterprise Driver Download: This printer driver is exclusively used by the corporate people. The full package of the driver set offers installer, driver for the printing and scanning purpose.
  • HP Host Based Plug and Play Driver Download: This is driver has one of the easiest installation and removes processes.
  • HP Universal Print Driver Download: When you are using HP LaserJet and the Multi-fuctional printer, then HP Universal Print Driver is a smart choice for you. It can search and configure the HP Printing device by itself.
  • PCL 6 Driver Download: Though HP launched this drivers as protocol, it has become a standard which can be followed for the future printers also.

To download the drivers from the HP website, you need to visit the HP Customer Support Page. You can download and install the driver according to the Printer model.

Windows Driver Update: Many people use Microsoft Windows Update to install the driver which supports Windows 10. It will help you to automatically update the driver when connected with internet.

How to Set up and Register Epson WF 2660 Printer

set-up-2660-Epson-printer

It is a bit difficult to find a printer that offers a good combination of quality print, scan, copy, fax, price, and features. Epson Workforce WF 2660 seems to be a good find to have it for your office or home use. Embedded with PrecisionCore printhead technology, the Epson WF 2660 features a larger number of nozzles than Epson’s other printheads which allows it to render enhanced print quality.

Also, the printer offers fast prints, Photo quality color and saturation on photo paper, Duplex printing and ADF, and much more. Whether you are looking to print via USB, WiFi, Ethernet, cloud-based services or even NFC (Near Filed Communication), this printer is smartly packed with great functionality and compatibility with another device that lets you print or scan from any computer or mobile device with ease.

Capable of printing at a maximum resolution of 4800X2400 dpi and scanning at a resolution 1200×2400 dpi, Epson WF 2660 is a remarkable printer to go for.

Features of Epson WF2660

  • Laser quality prints at a speed of 7.3 ISO ppm (color) and 13 ISO ppm (black).
  • Wireless connectivity with WiFi Direct and NFC
  • Capacity of 150 sheets
  • Automatic 2 sided printing with 30-page Auto Document Feeder
  • Compact and sleek design
  • High-resolution print and scan
  • Easy to use
  • Epson Mobile Solution

What do you get in the Box?

  • Epson Workforce WF 2660 all-in-one printer
  • Installation CD
  • Power cord
  • Instruction manual
  • DURABrite Ultra Ink cartridges – Four 220 series ink cartridges: Cyan, Magenta, Yellow, and Black.

How to Setup Epson WF 2660 for the First Time?

Begin by installing the driver software for your Epson WF 2660 from the installation CD which came with your printer in the box. If you can’t install the driver software from the installation CD, you can download and install the latest version from the link http://www.epson.com/cgi-bin/Store/support/SupportIndex.jsp. After that follow these steps:

1.) Select the Home button on your printer and then press the Wireless/Network icon on the control panel screen.

2.) Now, go to the Wi-Fi Setup Wizard option under the Wi-Fi Setup list. You will see a new dialogue box. Find and select the name of your Wireless network on the screen.

3.) If your Wireless network is not displaying in the list, you can enter it manually by going to the Other Networks option and then selecting the Network (SSID) field to enter the name of your Wireless network and typing the password in the Password field.

4.) After entering the Wireless network and password, press the Enter button and then tap on the Proceed option.  After that, press the OK button once you have verified the display network settings.

5.) Next, hit Done and then select the Home button to get back to the Home screen. Once the connection sets up, a Wireless icon will appear on the top right corner of the home screen.

How to Set up and Register Epson WF 2660 Printer in Epson Connect?

1.) Begin by installing the Epson Connect printer setup with the installation CD that you have got with your printer. Once installation gets complete, open the program.

2.) Now, you will notice that application has started searching for the printer automatically. Once the result gets displayed, select your Epson WF 2660 printer and proceed to the next screen.

3.) Next, select Printer Registration and read the License Agreement. Accept the agreement to get to the next step.

4.) Provide the required details when prompted on the next screen. Hit Finish to complete the Epson Connect registration process.

How to Fix Common Issues in Epson WF 2660?

Red Light Blinking Problem

Epson WF 2660 comes integrated with a unique feature that works as a warning. This warning alert is identified by constant blinking of red light on the printer. The red light warning on the printer which is considered as an issue by many is actually an alert sign that notifies the user about the low ink level.

This warning system is mated in such a manner that whenever the print count crosses above 3800 or 4000, it assumes that ink level to be getting lower or about to get empty and thus starts blinking red light. The warning system works according to an ink tank having a capacity of printing 4000 pages.

In order to fix this red light blinking error, once just need to disconnect the ink tanks from the printer while the light is blinking and lacing them back.

Cartridge Recognition Problem

In order to prolong the life of its printers, Epson always recommends the users to always use genuine products with its printers. And that is why Epson WF 2660 is integrated with special IC chips that restrict the installation of third-party ink tanks or cartridges by not recognize them.

To bypass this Cartridge recognition error, simply restart your printer and check if the printer still shows the error. In case the error still displays, it is best to replace non-authentic parts with authentic ones. This will not only fix the issue but also help in maintaining the efficacy of your Epson printer.

Our Partners :- Contact Yahoo Email Support Contact Gmail Customer Support